|When the time has come to re-shingle your roof, one decision you will be faced with is whether to strip off the
old shingles, or apply the new ones right over the existing layer. There is no easy answer. Although each roof
must be evaluated individually, there are some general guidelines you can follow to help you make an informed
You will probably have to tear off the existing shingles:
- If an inspection of the deck reveals rotted or warped wood, or large gaps between the deck boards. Any
rotten or damaged boards should be replaced before applying the new shingles.
For best roof performance, you may want to consider re-covering "board" roof decks with a layer of 3/8" plywood,
before applying the shingles.
- If there are more than two layers of existing shingles on the roof.
Most roofs are designed to carry the weight of three layers of shingles (plus snow loads). All roofs should easily handle the weight of two layers of shingles.
- If the roof structure shows signs of sag across the ridge or truss lines.
If the roof does not look straight and feel solid, you may want to have the structure professionally inspected to check for structural defects.
- If the condition of the existing shingles is so rough and distorted that it would not be practical to flatten all raised areas enough for the next layer to lay flat.
In most cases, it is not necessary to tear off the old shingles before applying the new ones. If your roof has only
one layer of shingles, laying relatively flat, and the plywood decking is in fairly good condition, a tear-off is not
needed. Not only will the existing layer (although old and weathered) provide a secondary back-up roof for the
new shingles, but it will also save you the cost and inconvenience of removing and disposing of the old shingles.
However, it is suggested that before making a final decision, a check be made with local officials to ensure that
you do not infringe on any building code.
Even though shingles are not environmentally hazardous, unnecessarily dumping them into landfills is a
disservice to the community. Currently many companies are researching ways to recycle roofing tear-off
material into pavement and other construction products. It is likely that the next time your roof needs replacing,
technology will exist to use those shingles, rather than throw them away.